Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used iron alloy with a large output of silicon manganese alloy. Silicon manganese alloy is a composite Oxygen scavenger commonly used in steelmaking, as well as a reducing agent for low carbon ferromanganese and silicothermic production of metallic manganese in production. Silicon manganese alloy can be smelted continuously in large, medium, and small submerged arc furnaces. Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Its consumption ranks second among electric furnace ferroalloy products. The silicon and manganese in silicon manganese alloy have a strong affinity for oxygen. When silicon manganese alloy is used in steelmaking, the deoxygenation products MnSiO3 and MnSiO4 produced are melted at 1270 ℃ and 1327 ℃, respectively. They have the advantages of low melting point, large particles, easy floatation, and good deoxygenation effect. Under the same conditions, using manganese or silicon alone for deoxidation results in a burning loss rate of 46% and 37%, respectively, while using silicon manganese alloy for deoxidation results in a burning loss rate of 29% for both. Therefore, it has been widely used in steelmaking. Its output growth rate is higher than the average growth rate of ferroalloys, and it has become an indispensable composite Oxygen scavenger and alloy additive in the steel industry. Silicon manganese alloys with carbon content below 1.9% are still used as semi-finished products for the production of medium to low carbon ferromanganese and electro silicothermic manganese metal. In ferroalloy production enterprises, the silicon manganese alloy used for steelmaking is usually referred to as commercial silicon manganese alloy, the silicon manganese alloy used for smelting low-carbon iron is referred to as self used silicon manganese alloy, and the silicon manganese alloy used for smelting metal is referred to as high silicon silicon silicon manganese alloy. Manganese can be combined with silicon to synthesize silicides MnSiO3, MnSiO, and MnSiO3. From the silicon manganese state diagram, it can be seen that the most stable silicide is MnSi. Due to the negative value of free energy generated by silicides of manganese, which is much greater than the negative value of free energy generated by carbides of manganese, the higher the silicon content in silicon manganese alloys, the lower the carbon content.
